Concrete coatings built for Florida sun, humidity, and everyday life — with the prep, discipline, and clean finish you'd expect from a veteran-owned crew.
Serving homeowners from Sarasota to Naples — including Fort Myers, Cape Coral, Bonita Springs & Marco Island.
Tap to call: (772) 773-2626
We focus on the two surfaces Southwest Florida homeowners ask for most — and we put the work into preparation so the coating has something solid to bond to.
Refresh a faded, cracked, or slippery pool deck with a coating designed for wet, sunny, barefoot spaces around the pool and lanai.
*Repairs are assessed during your free quote — extent depends on the condition of your concrete.
Quote My Pool Deck
Turn a stained, dusty garage into a clean, finished space — for parking, storage, a workshop, or a home gym.
Most coating failures start before the first coat goes down. Shortcuts on prep show up later as peeling, bubbling, or hot-tire marks. We start with the concrete itself.
We mechanically grind the surface to open the concrete and create a proper profile for bonding — not just a quick acid wash or sweep.
Cracks, pits, and damage are addressed before coating, so the finished surface looks even and performs as one system.
Florida sun is relentless. We talk through topcoat options suited to outdoor pool decks and sun-exposed garages during your quote.
Garage coatings selected with daily parking, oil, and household chemicals in mind — a sealed surface that's far easier to maintain.
Coastal air, humidity, and chlorinated / saltwater pools are part of life here. Your surface and finish are matched to where it will live.
A sealed, non-porous finish means sand, dirt, and spills don't soak in the way they do on bare concrete. Rinse, sweep, or mop — done.
Veteran Concrete Coatings is veteran-owned by Dewey. That shows up in the simple things homeowners actually notice: showing up when we say we will, communicating clearly, protecting your home, doing the prep right even when it's the hard part, and leaving the job site clean.
No pressure, no confusing upsells. You get a walk-through of your concrete, an honest conversation about options, and a clear free quote for your pool deck or garage floor.
From first call to final walk-through — here's what to expect. Exact timing and return-to-use depend on your project, surface, and coating system, and we'll confirm that before work begins.
Call (772) 773-2626 or prepare the form below, then call to share it. We look at your space, listen to what you want, and measure up.
Pick your finish, confirm the plan and timing, and get ready by clearing the space as discussed.
Diamond grinding, cleaning, and crack / surface repair — the foundation of a coating that lasts.
Base coat, flake / finish, and protective topcoat applied as a system for your garage or pool deck.
Final walk-through together, care guidance, and clear direction on when you can walk, place items, or park on it.
These are popular color directions to get you thinking — tones that work with Florida tile, pavers, and coastal homes. We'll look at samples and talk through what fits your space during your quote.
Gray, black & white — the classic clean garage look. Hides dirt exceptionally well.
Warm tans & creams — a natural fit for pool decks and sun-warm garage floors.
Deeper charcoal blend for a bold, modern garage or workshop finish.
Soft, sun-warm tones that brighten a pool deck without glaring in full sun.
Blue-gray accents that pick up pool water and coastal exteriors beautifully.
Bright, light stone tones for homeowners who want the space to feel open and clean.
Finish availability and exact blends are confirmed at your quote. Photos on this page show the look of finished flake coatings.
If you're along Florida's Gulf Coast between Sarasota and Marco Island, you're in our service area. Don't see your town? Call (772) 773-2626 and ask.
Prep is the most important step. We diamond-grind the concrete to remove surface contaminants and create a texture (profile) the coating can bond to, clean the surface thoroughly, and repair cracks and pits before any coating is applied. Skipping or rushing this step is the most common reason coatings peel.
Every quote is based on your actual space. The main factors are square footage, the condition of your concrete, whether there's an existing coating or sealer to remove, the amount of crack / surface repair needed, and the finish and system you choose. That's why we quote after seeing — or getting good details about — your project, rather than listing a one-size price.
In simple terms: epoxy is a well-established, hard, durable base often used in garage systems. Polyurea and polyaspartic coatings cure faster and are often chosen as topcoats for UV stability outdoors. Many quality systems combine them. The right choice depends on whether it's a garage or a sun-exposed pool deck, your timeline, and your budget — we'll explain the trade-offs neutrally at your quote, with no pressure.
It depends on the project — size, repairs needed, weather / humidity, and the coating system selected all matter. Some systems allow faster return to foot traffic and vehicles than others. Before work starts, we'll give you a clear schedule for your specific job, including when you can walk on it, move items back, swim, or park.
Pool decks need traction. Slip-resistant additives and finish textures are available and are an important part of the conversation for any pool deck or lanai project. Tell us how the space is used — kids, guests, barefoot traffic — so we can recommend the right texture.
One of the biggest benefits is how simple it is: sweep or rinse regularly, mop with mild cleaner as needed, and wipe up harsh chemicals or spills promptly. We'll leave you with care guidance specific to your finish at the final walk-through.
Tell us about your pool deck or garage floor and we'll take it from there. Prefer to talk? Call now — you'll reach us directly.
(772) 773-2626Hours: Monday–Saturday, 8am–5pm
Veteran-Owned • Sarasota to Naples
Pool Decks & Garage Floors